BUNGARD BEL 200X150-1 - Photo PCB, single-sided, 200x150 mm, 1.5 mm, 35 µ
15.11 EUR
Detailed sheet with complete information, compare prices and find the features for PRODUCTNAME, at the price of PRICE CURRENCY; classified in the category CATEGORY NAME; this product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
Premium quality original Bungard base material.
Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Premium quality original Bungard base material.
Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
RADEMACHER FPE1 200X150 - Photo PCB, epoxy, single-sided, 200x150 mm, 1.5 mm, 35 µ
16.31 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
BUNGARD BEL 175X125-1 - Photo PCB, single-sided, 175x125 mm, 1.5 mm, 35 µ
13.72 EUR
Premium quality original Bungard base material.Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.
BUNGARD BEL 300X210-1 - Photo PCB, single-sided, 300x210 mm, 1.5 mm, 35 µ
20.91 EUR
Premium quality original Bungard base material.Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.
BUNGARD BEL 160X100-1 - Photo PCB, single-sided, 160x100 mm, 1.5 mm, 35 µ
12.53 EUR
Premium quality original Bungard base material.Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.
BUNGARD BEL 75X100-1 - Photo PCB, single-sided, 75x100 mm, 1.5 mm, 35 µ
11.5 EUR
Premium quality original Bungard base material.Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.
BUNGARD BEL 250X200-1 - Photo PCB, single-sided, 250x200 mm, 1.5 mm, 35 µ
18.48 EUR
Premium quality original Bungard base material.Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.
BUNGARD BEL 250X150-1 - Photo PCB, single-sided, 250x150 mm, 1.5 mm, 35 µ
16.46 EUR
Premium quality original Bungard base material.Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.
BUNGARD EP2CU 300X200 - PCB, epoxy, double-sided, 300 x 200 mm
17.91 EUR
Epoxy PCBBase material: FR4
BUNGARD EP2CU 160X100 - PCB, epoxy, double-sided, 160 x 100 mm
14.34 EUR
Epoxy PCBBase material: FR4
BUNGARD FAVORIT WS-12 - Tool kit for BEL-Favorit Ø interior 1.2 mm
90.56 EUR
Tool kit for Favorit manual press.• Interior ø: 1.2 mm
BUNGARD FAVORIT WS-10 - Tool kit for BEL-Favorit Ø interior 1.0 mm
90.56 EUR
Tool kit for Favorit manual press.• Interior ø: 1.0 mm
RADEMACHER FPE1 300X200 - Photo PCB, epoxy, single-sided, 300x200 mm, 1.5 mm, 35 µ
22.66 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 233X160 - Photo PCB, epoxy, single-sided, 233x160 mm, 1.5 mm, 35 µ
18.21 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 160X100 - Photo PCB, epoxy, single-sided, 160x100 mm, 1.5 mm, 35 µ
13.67 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 150X100 - Photo PCB, epoxy, single-sided, 150x100 mm, 1.5 mm, 35 µ
13.21 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 500X500 - Photo PCB, epoxy, single-sided, 500x500 mm, 1.5 mm, 35 µ
66.08 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 100X75 - Photo PCB, epoxy, single-sided, 100x75 mm, 1.5 mm, 35 µ
11.6 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
RADEMACHER FPE1 250X250 - Photo PCB, epoxy, single-sided, 250x250 mm, 1.5 mm, 35 µ
23.7 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
BUNGARD BOHRER 1,5 - Ten-piece carbide drill bit set 1.5 mm
36.77 EUR
1.5-mm carbide drill bits in ten-piece plastic box.Precisely manufactured drill bits with a high level of rotational accuracy and strength.
Reinforced shank 3.175 mm, length approx. 38 mm. The distance from the tip to the upper side of the ring is 21 mm.
The drill bit is ringed and marked with the drill bit diameter.
BOX4U 5U320300 - Industrial housing, 200 x 150 x 75 mm, IP65, light gray
27.73 EUR
Industrial enclosure made of ABS, cover screws screwed into high-quality threaded bushes, no thread wear even after repeated opening.The enclosure can be mounted on the wall using the screw channels.
Large processing areas and versatile mounting options for connectors, switches and buttons. PCBs can be securely fastened via screw domes in the bottom section.
Protection class IP66 / DIN EN 60529
Colour light grey similar to RAL 7035
Factory fitted round cord seal
Operating temperature -25°C ... +70°C
Scope of delivery: Upper and lower part, 4x cover screws V2A
PATRIOT MEMORY 50PA1656-1046SL1 - 16 GB DDR5 5600 CL46 Signature Line, single-sided
268.25 EUR
Patriot's Signature Line DDR5 memory modules are designed to deliver an immense performance improvement for next generation Intel platforms. Requiring only 1.1 V of power, Signature Line DDR5 modules consume less power and emit less heat despite the increased frequency and speed. Enhanced power improvements include an onboard Power Management IC (PMIC), which provides better control of local voltage regulation while delivering increased threshold protection, simultaneous monitoring, intelligent voltage and power management.
The Signature Line DDR5 series includes onboard thermal sensors to monitor and protect against thermal issues and better overall reporting. In addition, the latest on-die ECC (Error-Correcting Code) further enhances the accuracy of data-processing and your overall system's stability.
PATRIOT MEMORY 50PA0856-1046SL1 - 8 GB DDR5 5600 CL46 Signature Line, single-sided
154.55 EUR
Patriot's Signature Line DDR5 memory modules are designed to deliver an immense performance improvement for next generation Intel platforms. Requiring only 1.1 V of power, Signature Line DDR5 modules consume less power and emit less heat despite the increased frequency and speed. Enhanced power improvements include an onboard Power Management IC (PMIC), which provides better control of local voltage regulation while delivering increased threshold protection, simultaneous monitoring, intelligent voltage and power management.
The Signature Line DDR5 series includes onboard thermal sensors to monitor and protect against thermal issues and better overall reporting. In addition, the latest on-die ECC (Error-Correcting Code) further enhances the accuracy of data-processing and your overall system's stability.
BUNGARD BEL 160X100-1-8 - Photo PCB, single-sided, 160x100 mm, 0.8 mm, 35 µ
12.53 EUR
Premium quality original Bungard base material.Tested and approved in accordance with MIL, UL, VDE, IEC, NEMA and other regulatory safety standards agencies. The boards are protected with blue protective film that features a black adhesive side.
RADEMACHER FPE2 200X150 - Photo PCB, epoxy, double-sided, 200x150 mm, 1.5 mm, 35 µ
18.84 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
BUNGARD FEPCU 150X100 - Photo board, epoxyd, single-sided, 150x100 mm
12.84 EUR
Epoxyd board 1.5 mm, one-sided Cu 35µm,Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15min
500W Nitraphot 6 - 7min
At a distance of approx. 30 cm and max. format 150x200.
Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is.
Etching times: with a fresh ammonium persulphate bath at 40 - 50°C: 5 - 10 minutes. Please see our main catalogue for more information on exposure and etching times
BUNGARD NIETEN 1,2MM - Bag of 1000 1.2 mm hollow rivets for Bel-Favorit
31.65 EUR
Bag of 1000 hollow rivets for Favorit manual press.• Material: copper
• Interior Ø: 1.2 mm
BUNGARD FEPCU 300X200 - Photo board, epoxyd, single-sided, 300x200 mm
20.91 EUR
Epoxyd board 1.5 mm, one-sided Cu 35µm,Exposure times:
30W UV tubes 60 - 90s
1000 W halogen 45 - 70s
250W Nitraphot 12 - 15min
500W Nitraphot 6 - 7min
At a distance of approx. 30 cm and max. format 150x200.
Development times: at 25 - 30°C in 25 - 90s depending on how fresh the bath is.
Etching times: with a fresh ammonium persulphate bath at 40 - 50°C: 5 - 10 minutes. Please see our main catalogue for more information on exposure and etching times
RADEMACHER FPE1 100X50 - Photo PCB, epoxy, single-sided, 100x50 mm, 1.5 mm, 35 µ
11.4 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
ROLLEI 20681 - Photo and slide scanner, 5.1 MP, 61 mm
122.61 EUR
"In the age of the Internet and digital photography, slides, negatives and even photos eke out a miserable existence in magazines, folders, shoeboxes and cigar boxes. It's a shame they don't find their way onto websites and social media platforms. And the purest disaster when the collected memories gradually fade and fall victim to the ravages of time.- 5.1 megapixel
- 6.1 cm (2.4"") TFT colour monitor
- automatic exposure
- Scan without computer
- USB 2.0
Digitised, restored, preservedWith the PDF-S 240 SE multi-scanner from Rollei, you can digitise your photos and make them accessible for optimisation through modern image processing. Try out the possibilities the included software opens up for you if you have scanned photos from grandfather's or great-grandfather's time. You can make cracks, scratches and stains disappear, and optimise brightness and contrast to reveal details you might not have spotted on the original. The high resolution of the PDF-S 240 SE of 1800 dpi, interpolated even up to 2400 dpi, also allows you to expose the scan data in much larger formats than the often very small historical originals - scan your ancestral gallery, large enough for today's picture frames, or share the pictures with relatives and friends on the web.
Multiscanner for photos and films
With the Rollei PDF-S 240 SE, you get a multifunctional scanner that can be switched between reflected light mode - for photos up to image size 13 x 18 cm - and transmitted light mode - for negatives as well as mounted slides and slide film strips - with a simple flip of the switch. This means you are well equipped to digitise your entire analogue archive. Exposure is automatic, but can be adjusted individually if required. Pure white LEDs ensure true colour reproduction, both in incident and transmitted light mode. It is not absolutely necessary to connect the Rollei PDF-S 240 SE to a computer for your scans. Simply check the results on the integrated 2.4-inch TFT colour display and save the scan data on your SD, SDHC or MMC card, for which the device offers a slot."
RADEMACHER FPE2 100X50 - Photo PCB, epoxy, double-sided, 100x50 mm, 1.5 mm, 35 µ
11.55 EUR
These high-quality, photo-positive PCBs can hold their own with products from other well-known manufacturers.• Photo PCBs with new environmentally friendly photo-positive coating (no chlorocarbons)
• Completely uniform application of the photo coating
• Colour photoresist
• Very fine resolution
• With opaque protective film
• Film firmly adheres right up to the edges
• High-quality base material
• Precise dimensional accuracy
• Uniformly high quality from batch to batch
Exposure times:
30-W UV tubes: 60 - 90 s
1000-W halogen bulbs: 45 - 70 s
250-W photo lamps: 12 - 15 min.
500-W photo lamps: 6 - 7 min.
At a distance of approx. 30 cm and max. format of 150x200.
Development times: at 25 - 30°C: in 25 - 90 s, depending on the freshness of the bath.
Etching times: in a freshly made ammonium persulfate bath at a temperature of 40 - 50°C: 5 - 10 minutes. For more information on exposure and etching times, please refer to our main catalogue
TESA 57910 - Double-sided tesafilm®, 7.5 m x 12 mm, 1 roll
11.71 EUR
"Double-sided tesafilm® is perfect for sticking photos, paper and light cardboard reliably and for a long time. The double-sided adhesive film is transparent and is very easy to roll. It can be used in a variety of ways in the home or in the office and is a must-have for any desk. - Double-sided adhesive film
- Transparent
- Sticks reliably
- High resistance to ageing
- Easy to dispense
- PP film
- Dimensions: 7.5 m x 12 mm
- Contents: one roll
TESA 57954 - Double-sided tesafilm®, 33 m x 19 mm, 1 roll
20.23 EUR
"Double-sided tesafilm® is perfect for sticking photos, paper and light cardboard reliably and for a long time. The double-sided adhesive film is transparent and is very easy to roll. It can be used in a variety of ways in the home or in the office and is a must-have for any desk. - Double-sided adhesive film
- Transparent
- Sticks reliably
- High resistance to ageing
- Easy to dispense
- PP film
- Dimensions: 33 m x 19 mm
- Contents: one roll
TESA 57911 - tesafilm® double sided, 7.5 m x 12 mm, 2 rolls
13.03 EUR
"Double-sided tesafilm® is perfect for sticking photos, paper and light cardboard reliably and for a long time. The double-sided adhesive film is transparent and is very easy to roll. It can be used in a variety of ways in the home or in the office and is a must-have for any desk. - Double-sided adhesive film
- Transparent
- Sticks reliably
- High resistance to ageing
- Easy to dispense
- PP film
- Dimensions: 7.5 m x 12 mm
- Contents: two rolls
DIPTRONICS DIP DTSA-62K - Short stroke button, PCB assembly, 1 NO, 6 x 6 x 5 mm
10.21 EUR
"- PCB button
- Single-pole input button with one operating contact
- Moulded connecting legs to prevent it falling out (snap-in)
- For assembling printed circuit boards
- Very small dimensions
- For data and signal technology, measurement and control technology, membrane keyboard